序号 | 论文题目 | 作者 | 发表日期 | 发表刊物 |
1 | Development of the electrical properties of KNN-based lead-free piezoceramics based on the phase boundary building and ternary composition designing | 付磊 | 2017 | Mater. Res. Bull., SCI |
2 | Investigation of metadynamic recrystallization behavior in SA508-Ш steel during hot deformation | 董定乾 | 2017 | J. Manuf. Proc.,SCI |
3 | Correlation between microstructural evolutions and electrical mechanical behaviors in Nb/Ce co-doped Pb(Zr0.52 Ti0.48)O3 ceramics at different sintering temperatures | 付磊 | 2017 | Mater. Res. Bull., SCI |
4 | 气液固三相流化床层膨胀特性实验分析 | 林海波 | 2017 | 化学工程 |
5 | 基于PIV技术的ABR反应器在不同HRT 下的液相流态特性 | 董亮 | 2017 | 环境工程学报 |
6 | Improved design of measuring device for ring rolling | 刘明 | 2017 | Machine Tool/Hydraulics |
7 | 新型滤芯质量性能检测及评价方法 | 刘少北 | 2017 | 机械设计与制造 |
8 | 多密度矿粒干法分选装置设计及试验研究 | 李玉如 | 2017 | 有色金属(选矿部分) |
9 | Dynamic and stability response of a cylindrical shell subjected to viscous annular flow and thermal load | 宁文波 | 2016 | Int. J. Struct. Stab.Dyn., SCI |
10 | Dynamics and stability of a functionally graded cylindrical thin shell containing helical annular flow including initial axial loads | 宁文波 | 2016 | Acta Mech., SCI |
11 | Dynamic stability analysis of a cylindrical shell subjected to helical annular flow under thermal loads | 宁文波 | 2016 | Int. J. Mech. Sci., SCI |
12 | Magnetic and optical properties of WO3/TiO2 superlattice | 焦天 | 2016 | Mater. Chem. Phys. |
13 | 循环湍动流化床实验平台设计及实验研究 | 谢君科 | 2016 | 机械设计与研究 |
14 | 循环湍动流化床的研究进展 | 曾涛 | 2016 | 机械设计与制造 |
15 | 多层折叠不锈钢滤芯过滤特性实验研究 | 刘少北 | 2016 | 机床与液压 |
16 | Flame resistance and aging mechanism of flame retardant polycarbonate sheet containing linear phenolic resin charring agent | 石艳 | 2015 | Polym. Degr. Stab., SCI |
17 | Lagrangian dynamic large-eddy simulation of wind turbine near wakes combined with an actuator line method | 钟宏民 | 2015 | Appl. Energy, SCI |
18 | 含油废水处理试验装置设计及其试验研究 | 谢君科 | 2015 | 流体机械 |
19 | 基于CFD气固密相循环流化床湍动特性分析 | 刘少北 | 2015 | 矿山机械 |
20 | 长纤维过滤器过滤过程的数值模拟 | 柳忠彬 | 2014 | 环境工程学报 |